Public hearings for anti-dumping injury inquiries

Table of contents

    Attending a hearing

    Hearings can be held in person, by videoconference, in a hybrid format or in the absence of the parties (file hearing). 

    See the table below for more information about specific hearings. You can also contact us at 613-993-3595 or citt-tcce@tribunal.gc.ca to obtain further information on a case’s hearing schedule.

    Final injury inquiry hearings

    Final injury inquiryDate of hearingProduct definition
    NQ-2025-008May 25, 2026Thermoformed molded fibre plates and platters regardless of diameter or length, and bowls with diameters or widths of eight centimetres or greater and lips up to eight centimetres, regardless of fibre source, thickness, additives, colour, design, coating, or surface or other finishing, originating in or exported from the People’s Republic of China.
    NQ-2025-009June 1, 2026Truck bodies, having an exterior length of 8.5 feet to 32 feet, inclusively, of maximum exterior width of 103 inches, whether assembled or unassembled, being the structure or fixture designed to be affixed to a truck chassis for the primary purpose of containing or supporting goods for on road transportation, whether insulated or not, and whether equipped with refrigerating equipment or not, as well as truck body kits, assemblies, or subassemblies, originating in or exported from the People’s Republic of China. 
    NQ-2026-001Week of August 3, 2026Oil and gas well casing and green tube casing, made of carbon or alloy steel, welded or seamless, heat treated or not heat-treated, regardless of end finish, having an outside diameter from 4 ½” inches to 9 5/8” inches (114.3 mm to 245.2 mm), meeting or supplied to meet American Petroleum Institute (API) specification 5CT or equivalent and/or enhanced proprietary standards, in all grades, originating in or exported from the Republic of Austria but excluding the following: drill pipe, pup joints, unattached couplings, coupling stock, insulated tubing and vacuum insulated tubing, and stainless steel casing containing 10.5 percent or more by weight of chromium.
     

    Expiry review hearings

    Expiry reviewDate of hearingProduct definition
    RR-2025-005June 8, 2026Oil country tubular goods, including, in particular, casing and tubing, made of carbon or alloy steel, welded or seamless, heat-treated or not heat-treated, regardless of end finish, having an outside diameter from 2 3/8 inches to 13 3/8 inches (60.3 mm to 339.7 mm), meeting or supplied to meet American Petroleum Institute specification 5CT or equivalent standard, in all grades, excluding drill pipe, seamless casing up to 11 3/4 inches (298.5 mm) in outside diameter, pup joints, welded or seamless, heat-treated or not heat-treated, in lengths of up to 3.66 m (12 feet), and coupling stock, originating in or exported from the People’s Republic of China.
    RR-2025-006July 27, 2026Oil country tubular goods, which are casing, tubing and green tubes made of carbon or alloy steel, welded or seamless, heat-treated or not heat-treated, regardless of end finish, having an outside diameter from 2 3/8 inches to 13 3/8 inches (60.3 mm to 339.7 mm), meeting or supplied to meet American Petroleum Institute (API) specification 5CT or equivalent and/or enhanced proprietary standards, in all grades, excluding drill pipe, pup joints, couplings, coupling stock and stainless steel casing, tubing or green tubes containing 10.5 percent or more by weight of chromium, originating in or exported from the Separate Customs Territory of Taiwan, Penghu, Kinmen and Matsu, the Republic of India, the Republic of Indonesia, the Republic of Korea (South Korea), the Kingdom of Thailand, the Republic of Türkiye, Ukraine and the Socialist Republic of Vietnam, except for goods exported from South Korea by Hyundai Steel Company, and goods exported from Türkiye by Borusan Mannesmann Boru Sanayi ve Ticaret A.Ş.
    RR-2025-007August 31, 2026 Hot-rolled carbon steel plate and high strength low-alloy steel plate, not further manufactured than hot-rolled, heat-treated or not, in cut lengths, in widths greater than 72 inches (+/- 1,829 mm) to 152 inches (+/- 3,860 mm) inclusive, and thicknesses from 0.375 inches (+/- 9.525 mm) up to and including 4.5 inches (+/- 114.3 mm) (with all dimensions being plus or minus allowable tolerances contained in the applicable standards), originating in or exported from the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu (Chinese Taipei) and the Federal Republic of Germany, but excluding: plate in coil form, and plate having a rolled, raised figure at regular intervals on the surface (also known as floor plate).
    RR-2025-008September 28, 2026Photovoltaic modules and laminates consisting of crystalline silicon photovoltaic cells, including laminates shipped or packaged with other components of photovoltaic modules, and thin film photovoltaic products produced from amorphous silicon (a Si), cadmium telluride (CdTe), or copper indium gallium selenide (CIGS), originating in or exported from the People’s Republic of China, excluding modules, laminates or thin-film products with a power output not exceeding 100W, and also excluding modules, laminates or thin-film products incorporated into electrical goods where the function of the electrical goods is other than power generation and these electrical goods consume the electricity generated by the photovoltaic product.
    RR-2025-009October 26, 2026Wheat gluten, whether or not blended with wheat flour, salt or any other substance, with a minimum wheat protein content of 40% by weight on a dry basis calculated using a Jones Factor of 5.7, originating in or exported from Australia, Austria, Belgium, France, Germany and Lithuania, but excluding (i) devitalized wheat gluten; (ii) hydrolyzed wheat gluten; (iii) wheat protein isolates; and (iv) organic wheat gluten that is certified organic in accordance with and otherwise meets the requirements of the Food and Drugs Act, R.S.C., 1985, c. F 27, and regulations made thereunder, and the Safe Food for Canadians Act, S.C. 2012, c. 24, and regulations made thereunder including the Safe Food for Canadians Regulations, S.O.R./2018 108, all of which as may be amended or replaced from time to time.
    RR-2026-001November 23, 2026Whole potatoes, excluding seed potatoes, excluding imports during the period from May 1 to July 31, inclusive, of each calendar year, and excluding red potatoes, yellow potatoes and the exotic potato varieties, regardless of packaging, and white and russet potatoes imported in 50-lb. cartons in the following count sizes: 40, 50, 60, 70 and 80, and excluding whole potatoes certified as organic by a recognized certification agency, imported from the United States of America, for use or consumption in the province of British Columbia.
    RR-2026-002 and RR-2026-003Week of December 14, 2026Hot-rolled deformed steel concrete reinforcing bar in straight lengths or coils, commonly identified as rebar, in various diameters up to and including 56.4 millimeters, in various finishes, excluding plain round bar and fabricated rebar products, originating in or exported from the People’s Democratic Republic of Algeria, the Arab Republic of Egypt, the Republic of Indonesia, the Italian Republic, the Federation of Malaysia, the Republic of Singapore, the Socialist Republic of Vietnam (expiry review RR-2026-002), the Sultanate of Oman and the Russian Federation (expiry review RR-2026-003).